Forklift Part Forklift Rearview Mirror for 1-10 Ton Forklift

Forklift Rearview Mirror for 1-10 Ton Counterbalance Forklift

This forklift rearview mirror is a universal wide-angle convex mirror assembly designed for counterbalance forklifts from 1-ton to 10-ton capacity. The convex mirror glass provides a 120-degree field of view to the rear and sides — critical for reversing maneuvers where the operator must monitor blind spots behind the counterweight and mast structure that cannot be seen through the overhead guard or by turning the head. On 10-ton forklifts where the counterweight extends over 2 meters behind the operator seat, the rearward blind zone can conceal pedestrians, racking columns, and other forklifts — a convex mirror is the primary defense against this hazard.

The mirror head is constructed from impact-resistant ABS plastic with a UV-stabilized finish preventing yellowing and brittleness from years of outdoor exposure. The 12-inch (300mm) convex glass lens features a first-surface silvered mirror coating with anti-glare treatment, reducing the blinding effect of warehouse lighting and sunlight reflecting from polished concrete floors. The articulating ball-joint mount allows 360-degree rotation and 45-degree tilt, locked with a single M12 bolt. The universal U-bolt bracket fits tube diameters from 25mm to 50mm — compatible with overhead guard ROPS tubes, chassis frame rails, and mast cross-members.

Compatible with HELI, Hangcha, Toyota, Komatsu, Linde, TCM, Dalian, Lonking from 1T to 10T capacity. The mirror ships with U-bolt bracket, M12 lock nut, and flat washers — installation under 5 minutes with a 19mm wrench. For other safety components including cameras and strobes, browse our forklift side mirror category.

Technical Specifications

• Type: Universal convex wide-angle rearview mirror
• Mirror Diameter: 12 inches (300mm)
• Lens Type: Convex glass, 120-degree field of view
• Mirror Coating: First-surface silvered, anti-glare
• Housing: Impact-resistant ABS, UV-stabilized
• Adjustment: 360-degree rotation, 45-degree tilt, ball-joint
• Mounting: Universal U-bolt, 25mm-50mm tube
• Install Time: Under 5 minutes, single 19mm wrench
• Capacity Range: 1T to 10T counterbalance forklifts

Compatible Forklift Brands

Position the mirror from seated driving position before final tightening — the convex surface makes objects appear smaller, so aim to show the rearmost 5 meters behind the forklift. Tighten M12 to 35 Nm; overtightening cracks the ABS housing. Clean with water and microfiber only — ammonia-based cleaners attack the silvered coating. Baldwin Filters. Kingstream stocks forklift rearview mirrors for same-day dispatch — worldwide shipping with online tracking.