Forklift Oil pump

Forklift Oil Pump: Engine & Hydraulic Gear Pumps for Xinchai 490 Linde SGP1A

The oil pump is the heart of any engine or hydraulic system. In the engine, the oil pump is a positive-displacement gear pump driven by the crankshaft that circulates pressurized oil to every bearing, piston cooling jet, valvetrain component, and timing chain — oil pressure must reach 30-60 psi at operating temperature, with anything below 15 psi at idle indicating a worn pump or excessive bearing clearance. In the hydraulic system, the gear pump pressurizes hydraulic oil for mast lift cylinders, tilt cylinders, and attachment functions — cycling on demand and loading against the system relief valve. Running either type of pump dry destroys it within seconds because the pumped fluid provides both lubrication and cooling for the gears and housing.

Kingstream supplies both engine oil pumps for Xinchai 490/495 diesel engines and Linde forklifts, plus hydraulic gear pumps for forklift and construction equipment hydraulic systems. Every pump is inspected for gear clearance, housing bore condition, and relief valve function before shipment.

Types:
• Engine Oil Pump 490B-C490B — OEM-spec engine oil pump for Xinchai 490B and C490B diesel engines. The 490 series is the most common Chinese forklift engine, powering HELI/Hangcha 2-3.5T models
• Engine Oil Pump 495B-31000A — 12-cog engine oil pump for Xinchai 495 diesel engines. Larger displacement variant of the 490 platform
• Linde Engine Oil Pump DZ04102478 — Aowen brand OEM-spec engine oil pump for Linde forklift engines. 100% professionally tested, Jiangsu China
• Hydraulic Gear Pump SGP1A25 — Single-stage hydraulic gear pump for forklift, truck, construction, and agricultural equipment. 50 bar (725 psi) operating pressure, 3/4″ connection, 1-year warranty

When to Replace Oil Pumps:
• Oil pressure warning light on or gauge showing below 15 psi at idle / below 30 psi at speed → Worn pump gears, stuck relief valve, or worn engine bearings. Test with a mechanical gauge before condemning the pump
• Engine knocking or tapping noise from bearings after verifying oil level is correct → Oil pump is failing to deliver adequate pressure. Bearings are starved. Shut down immediately
• Hydraulic functions are slow, weak, or jerky with whining noise from the pump → Hydraulic gear pump is worn, cavitating, or has internal leakage past worn gear tips
• Metal particles visible in oil during oil change, especially non-ferrous (brass/bronze) → Pump bushings or wear plates are worn. Replace pump and flush the system
• Pump seized or shaft broken → Complete pump failure. Inspect the oil pickup screen for blockage — a clogged screen starves the pump and is the root cause of most pump seizures

OEM Cross-Reference:

Don’t see your engine? Send your engine model and pump type →

Compatible: Xinchai 490/495, Linde, SGP1A hydraulic systems. Browse our engine parts catalog.