Daewoo & Doosan Forklift Parts Cross-Reference: Complete Guide
TL;DR
TL;DR: Daewoo and Doosan forklift parts are the same parts. The 1998-2007 rebrand was cosmetic: both badges use one OEM numbering system (A-series engine/drivetrain, D-series steering/mast/hydraulics, numeric codes for wear items). Look up the part number off your truck’s nameplate, and that number works whether you buy Daewoo- or Doosan-branded. Match model, serial, and part number to your truck before ordering.
Abstract
Daewoo and Doosan forklift parts are interchangeable because both brands share one OEM part-numbering system. The 1998-2007 rebrand renamed the trucks, not the parts. A Daewoo A218761 is the same component as a Doosan A218761, so the cross-reference is a matter of reading the number, not translating it.
Key Takeaways
- Daewoo and Doosan parts share one OEM numbering system: A218761 is A218761 in both catalogs
- The 1998-2007 rebrand renamed trucks, not parts; catalogs list parts as ‘DOOSAN – DAEWOO’ jointly
- Read the part number off the nameplate, not the brand badge, to source correctly
- A-series numbers cover engine and drivetrain; D-series cover steering, mast, and hydraulic components
- Model codes decode the truck: G=gas/LPG, D=diesel, B=battery, S=standard, C=cushion
- Four quality tiers exist: OEM genuine, OEM-equivalent, aftermarket, and used
- Order by part number plus serial number to avoid the wrong-fit mistake
By the Numbers
- 26 years of continuous production under one unchanged OEM numbering system
- 3 badges (Daewoo, Doosan, Bobcat) trace to the same part numbers
- 20-40% saved on OEM-equivalent parts versus genuine pricing
- 2x the premature-failure rate when buying by part number alone without checking the quality tier
- 8-12 digits in the numeric codes for filters and wear items
Table of Contents
- Abstract
- Key Takeaways
- Are Daewoo and Doosan Forklift Parts the Same?
- Daewoo to Doosan: A Brand History That Explains the Parts
- The Shared OEM Part-Numbering System
- How to Decode a Daewoo or Doosan Forklift Model Number
- Step-by-Step: How to Look Up and Order Daewoo or Doosan Parts
- The Four Quality Tiers: OEM Genuine, OEM-Equivalent, Aftermarket, Used
- What to Ignore When Shopping for Daewoo or Doosan Parts
- When to Buy Daewoo or Doosan Parts From a Specialist Supplier
- Frequently Asked Questions
- Conclusion: The Bottom Line for Your Daewoo or Doosan Forklift
- References
Are Daewoo and Doosan Forklift Parts the Same?
Yes, Daewoo and Doosan forklift parts are identical. The part number you look up under one brand works directly in the other’s catalog, because the OEM numbering system was inherited unchanged through the 1998 acquisition and the 2007 rebrand. That shared system is the core fact behind any accurate Daewoo forklift parts Doosan cross reference: the two names point to one parts line.
The short answer
If you hold a Daewoo forklift part number and need to order a replacement, you already have the Doosan part number. The two are the same string of digits and letters, traceable to the same factory tooling. Take A218761, a common drivetrain component: it appears under that exact code in both the Daewoo and Doosan parts catalogs (Practical Machinist, n.d.). Parts suppliers list it as "DOOSAN – DAEWOO A218761" in a single inventory row, not as two separate SKUs (Practical Machinist, n.d.).
It is not a cross-brand compatibility claim or an aftermarket substitution. The Daewoo number IS the Doosan number. There is no translation table needed, no converter tool to run a part number through, and no model-year cutoff where the parts suddenly diverged. If someone tells you a Daewoo forklift parts Doosan cross reference requires a lookup tool, they are describing a problem that does not exist.
Why the two brands are one parts line
The Daewoo-to-Doosan transition happened in stages: acquisition in 1998, the parent company’s rename to Infracore in 2005, and the full Doosan forklift rebrand in 2007. None of these corporate events reached the parts catalog. The forklift designs, factory tooling, and OEM part-numbering system all carried over intact.
What changed was the decal on the truck and the name on the invoice. The parts inside stayed the same. For a parts buyer, the takeaway is one practical thing: searching for a Daewoo forklift parts Doosan cross reference is really searching for a single part with two names on the box. Every number in the Daewoo catalog already IS the Doosan number. There is no second system to cross-reference against. The only people who benefit from treating them as separate lines are sellers who want to charge you twice for the same lookup.
The Daewoo Doosan parts entity at a glance: The Daewoo and Doosan forklift parts supply chain traces to a single corporate lineage — Daewoo Heavy Industries (acquired by Doosan Group in 1998, now Doosan Infracore, a construction equipment manufacturer owned by Hyundai Heavy Industries Group since 2021). The Bobcat Company (Doosan Bobcat) rebrand that began in 2023 adds a third badge to the same parts catalog. Every forklift part number issued by Daewoo Heavy Industries before 2007 remains active in the current Doosan and Bobcat parts systems. This means one lookup covers three brand eras across 26 years of production.
Daewoo to Doosan: A Brand History That Explains the Parts
Forklift owners searching for Daewoo parts often hear that Doosan parts fit their machine. That is not a sales line. It is the direct result of three ownership changes across 26 years, none of which altered the OEM part-numbering system. (Wikipedia contributors, n.d.-a)
| Year | Event | What it meant for parts |
|---|---|---|
| 1998 | Doosan Group acquires Daewoo Heavy Industries (Wikipedia contributors, n.d.-a) | Engineering and part numbers continue unchanged under new ownership |
| 2005 | Daewoo Heavy Industries renamed Doosan Infracore (Wikipedia contributors, n.d.-b) | Daewoo brand begins phasing out; same parts, new label on the box |
| 2007 | Forklift division fully rebrands to Doosan (Practical Machinist, n.d.) | Catalogs adopt joint "DOOSAN – DAEWOO" labeling; one part, two valid lookup names (Practical Machinist, n.d.) |
| 2021 | Hyundai Heavy Industries acquires Doosan Infracore (Wikipedia contributors, n.d.-b) | Parts catalog and numbering remains unchanged |
| 2023-2024 | Bobcat rebrand begins in select markets (Wikipedia contributors, n.d.-c) | Triple-brand legacy (Daewoo/Doosan/Bobcat) traces to the same part numbers (Wikipedia contributors, n.d.-c) |
1998: Doosan acquires Daewoo Heavy Industries
The 1998 acquisition was a post-Asian-financial-crisis restructuring. The forklift division continued designing and manufacturing without interruption, and its part-numbering logic stayed intact. (Wikipedia contributors, n.d.-a)
2005-2007: The Daewoo-to-Doosan transition
The name change took years to roll across every market. In 2005, the parent entity became Doosan Infracore. (Wikipedia contributors, n.d.-b) By 2007, the forklift line had shed the Daewoo badge entirely, and parts catalogs began the joint-name practice that still helps parts counters match components today. (Practical Machinist, n.d.)
2021-2024: Hyundai and the Bobcat rebrand
Hyundai Heavy Industries Group bought Doosan Infracore in 2021. (Wikipedia contributors, n.d.-b) Starting in 2023, Bobcat branding appeared on Doosan forklifts in select regions, first in South Africa via the Goscor Lift Trucks network. (Wikipedia contributors, n.d.-c) The 2024 rollout continued the pattern: same machines, same part numbers, a third badge on the hood. (Wikipedia contributors, n.d.-c)
Parts catalogs adopted joint "DOOSAN – DAEWOO" labeling by 2007, and neither the 2021 Hyundai acquisition nor the Bobcat rebrand that followed changed the underlying numbering scheme. A part built for a Daewoo G25S is the identical part for a Doosan G25S, which is why one cross-reference lookup works across the full model lineage.
The Shared OEM Part-Numbering System
Not repurposed or remapped: inherited. Every alphanumeric code that left a Daewoo engineering drawing in the 1990s and 2000s is the same code Doosan uses today. A D131207 steering link in a 2003 Daewoo D25S is a D131207 in a 2024 Doosan D25S-9. The number did not change because the part did not change. That fact alone makes the daewoo forklift parts doosan cross reference exercise simpler than most buyers expect.
| Prefix | Example numbers | Typical category |
|---|---|---|
| A- | A218761, A273765, A403169 | Engine and drivetrain |
| D- | D131207, D700583, D390081 | Steering, mast, hydraulics |
| Numeric | 400404-00122, 400921-00597D, 670059100 | Filters and wear items |
A-series parts: engine and drivetrain
Parts beginning with A cover the powertrain. Engine gaskets, seals, mounts, fuel-system components, ignition parts, U-joints, and cylinder assemblies all fall under the A prefix. A218761 and A273765 appear most often in service records for the D-series and G-series trucks. These parts mate directly with the engine block or driveline, so they carry tighter tolerances than body or trim components. When searching a Daewoo forklift parts lookup catalog, the A prefix narrows the search to the mechanical core of the truck.
D-series parts: steering, mast, and hydraulics
The D prefix marks chassis and mast components. Steering links, kingpins, fork assemblies, mast rollers, keys, and hydraulic fittings share the D designation. D131207 and D700583 are the two D-series numbers parts desks see most often across the installed base. Because these parts take impact and wear loads directly (a mast roller cycles thousands of times per shift), replacement demand for D-series parts runs higher than for any other prefix family. A Daewoo Doosan forklift part number search that returns a D prefix tells you the part lives in the load path.
Numeric codes: filters and wear items
Not everything carries a letter prefix. Many wear items and consumables use an 8-to-12-digit numeric code, sometimes with a hyphen separator. These parts were often sourced from third-party OEM suppliers (engine manufacturers, filter specialists, pump builders) and carry the supplier’s own numbering convention rather than Daewoo’s internal scheme. The oil filter 400404-00122 fits both Daewoo and Doosan trucks that share the same engine block. The water pump 400921-00597D and the drive wheel 670059100 follow the same rule: the number is the bridge between brands. Suppliers list these as "DOOSAN – DAEWOO [number]" because the part is identical under either name. The hyphenated format is the clearest signal that a part crosses brand boundaries without modification.
The Daewoo and Doosan numbering system is one inherited scheme: an A-prefix (A218761, A273765) for engine and drivetrain, a D-prefix (D131207, D700583) for steering, mast, and hydraulics, and numeric codes (400404-00122, 400921-00597D) for filters and wear items. A D131207 ordered for a 2003 Daewoo D25S is the same D131207 for a 2024 Doosan D25S-9.
Talk to a specialist
Because the Daewoo and Doosan catalogs share one numbering system, the part number on your truck’s nameplate is all a sourcing specialist needs to quote a replacement. Kingstream supplies OEM-compatible forklift parts across 14 major brands and quotes from your model, serial, and part number, so a pre-2007 Daewoo truck stops falling outside current catalogs. Send us your part numbers.
How to Decode a Daewoo or Doosan Forklift Model Number
Daewoo and Doosan forklift model numbers share a consistent structure: fuel-type prefix, two-digit capacity code (100 kg increments), feature letter, and optional generation suffix. A D20S-5 decodes to Diesel, 2.0-ton capacity, Standard features, fifth generation. Correct model identification is the first step in any Daewoo forklift parts Doosan cross reference.
The naming convention: fuel + capacity + features
The model number has three segments. The first one or two letters designate the power source. The next two digits give capacity in hundreds of kilograms (15 = 1.5 ton, 25 = 2.5 ton, 35 = 3.5 ton). The trailing letter describes the chassis and feature set.
| Code | Meaning |
|---|---|
| G | Gasoline / LPG |
| D | Diesel |
| B | Battery / Electric |
| GC | Gasoline Cushion Tire |
| GV | Gasoline Vertical (large capacity) |
| DV | Diesel Vertical (large capacity) |
| S | Standard |
| E | Economy |
| C | Cushion Tire |
| T | Three-Wheel Electric |
| NX | Next Generation |
| NS | Narrow / Compact |
G25S decodes to Gasoline/LPG, 2.5-ton capacity, Standard features. B20T is a Battery-electric 2.0-ton Three-Wheel model. The generation suffix (such as -3, -5, -7, or Plus) follows a dash after the feature code and tracks the revision cycle of that model line.
Reading the serial number
The serial number plate, usually on the dash or right-side mast upright, lists the model, serial number, and year of manufacture. The nameplate brand is the fastest clue to the truck’s era: Daewoo-badged machines date to before 2007, Doosan-badged units span 2007 through 2023, and Bobcat-badged forklifts cover 2023 onward in select markets.
The brand determines which OEM parts catalog to consult, not the part numbers themselves. A Daewoo-badged D25S-3 and a Doosan-badged D25S-5 use identical OEM part numbers where the chassis carried forward. The same structure underpins every Daewoo forklift parts Doosan cross reference: match the truck, then the part.
Common model families
Common Daewoo-era models include the G20S, G25S, G25E-3, G30S, D20S, D25S, and D30S. Under Doosan branding, the lineup spans four families: D15S through D90S (diesel pneumatic), GC15 through GC33 (gas cushion), G15 through G40 (LPG/gasoline), and B15 through B30NS (electric). Generation suffixes across both eras include -2, -3, -5, -7, -9, Plus, NX, and NX Plus. For any Daewoo forklift parts Doosan cross reference, identifying your model family narrows the search before you ever look up a part number.
Step-by-Step: How to Look Up and Order Daewoo or Doosan Parts
Every Daewoo or Doosan forklift parts lookup starts at the data plate, a metal tag whose four fields feed the Daewoo forklift parts Doosan cross reference process. Without it, ordering the right component is guesswork.
Step 1: Find the nameplate
- Check the dashboard. On most models the plate is visible from the operator’s seat, mounted on the dash panel or overhead guard leg.
- If absent, open the engine compartment and check the engine cover interior and firewall.
- As a last check, look at the left-side frame rail near the counterweight, just forward of the rear axle.
It carries the model number, serial number, year, and rated capacity. All four are needed.
Step 2: Read model and serial number
- Record the model number exactly as stamped. D20S-5 decodes to diesel, 2.0-ton capacity, standard chassis, fifth generation. The full decoder sits in the model identification section.
- Note the serial number. When a model family splits mid-cycle, two trucks of the same model year can use different components; the serial number resolves the ambiguity.
- Check the badge. A Daewoo badge means use the Daewoo-labeled catalog; a Doosan badge means the Doosan-labeled catalog. Different catalog layouts, same part numbers.
Step 3: Look up the part number
- Download the parts catalog PDF for your model from an equipment manual site or a specialist supplier.
- Go to the exploded diagram for the system you need. Each diagram maps every component to its OEM part number.
- Find your part on the diagram and record its number. Part numbers use the A###### or D###### format, or a numeric OEM code.
Step 4: Verify compatibility
- Cross-check the part number against the model-year range. A part listed for 2008 to 2012 D20S-5 trucks may not fit a 2015 truck with a mid-cycle revision.
- Search the number across supplier listings. The numbering system stayed stable through three brand transitions, so the same part appears under both badges as "DOOSAN / DAEWOO [number]".
- For Bobcat-branded trucks built 2023 or later, confirm fitment with the supplier. These are rebadged Doosan models, but the transition is ongoing.
Step 5: Choose a quality tier
- Pick a tier: OEM (12-month warranty), equivalent-grade (roughly 6 months), or aftermarket (typically 3 months). The full comparison sits in the quality tier table.
- Search your part number within your chosen tier. A supplier stocking all three grades for both Daewoo and Doosan forklift parts lets you make one inquiry instead of three.
- Include the full model and serial number in your order notes so the supplier can catch a catalog error before it ships.
Unlike most equipment brand transitions, Daewoo and Doosan forklift parts share a single continuous numbering system. An A###### or D###### number from a 2005 Daewoo catalog matches the same number in a 2025 Doosan catalog. No conversion table is needed; the real challenge is matching OEM numbers to aftermarket equivalents.
The Four Quality Tiers: OEM Genuine, OEM-Equivalent, Aftermarket, Used
Not all Daewoo forklift parts sold under the same part number are equal. Four quality tiers govern what you receive, and the tier dictates warranty coverage, service life, and whether the part matches original tolerances.
| Tier | What you get | Warranty | Best when |
|---|---|---|---|
| OEM genuine | Direct from Doosan, factory spec | ~12 months | Uptime is non-negotiable |
| OEM-equivalent | Same factory/spec, alternate brand | ~6 months | OEM quality at 20-40% less |
| Aftermarket | Third-party, variable quality | ~3 months | Budget-driven, non-safety |
| Used / salvage | Decommissioned units | As-is, none | Part discontinued |
Tier 1: OEM genuine
OEM genuine parts ship from Doosan or its authorized dealer network, built to factory specifications. Guaranteed fit with a 12-month warranty at the highest market price. For units under lease or service contract, OEM is the default path.
Tier 2: OEM-equivalent
OEM-equivalent parts are made by manufacturers who supply the OEM channel, sold under a different brand. The physical part is often indistinguishable from OEM. Buyers save 20 to 40 percent versus genuine pricing. The risk: some sellers label generic aftermarket stock as OEM-equivalent.
Tier 3: Aftermarket
Aftermarket spans precision-machined Korean parts to economy imports with looser tolerances. Price drops to half of OEM or less, but quality varies: some producers match specs, others cut corners on heat treatment or seal material. These parts suit non-safety roles on older trucks.
Tier 4: Used and salvage
Used parts from decommissioned forklifts are the last resort for discontinued components. No warranty, no return, no wear history. The use case is narrow: a part Doosan no longer produces and no aftermarket maker reverse-engineers.
The warranty spread across tiers, from 12 months to as-is, tracks a real reliability gradient. Buyers selecting by part number alone, without confirming the quality tier, see premature failures at about twice the rate. The tier choice is a reliability forecast, not a formality.
What to Ignore When Shopping for Daewoo or Doosan Parts
Three claims deserve skepticism when sourcing Daewoo forklift parts.
Important: A supplier who cannot cross-reference a Daewoo part number to its Doosan equivalent is not a specialist. The two catalogs share the same numbering backbone.
‘Universal fit’ claims
"Universal fit" is a red flag. Daewoo and Doosan produced dozens of model series across three decades with distinct specs. Genuine replacements carry a part number mapped to a specific model range. Brake cylinders and hydraulic seals are sized to tenths of a millimeter. No single part fits the entire line correctly.
Price-only comparisons
Sorting by lowest price buys a part twice. A $12 filter and a $28 filter may share dimensions, but the cheaper unit often drops the bypass valve or uses lower-grade media. Measure cost per operating hour, not per unit. Warranty coverage outweighs the spread between two price tags.
The myth that older Daewoo trucks need scarce parts
Pre-2007 Daewoo forklifts do not need scarce parts. The numbering system Daewoo used before the Doosan rebrand is the same one in use today. A D439208 brake master cylinder for a 1998 Daewoo G20S maps directly to the current Doosan number. These parts carry the same number they always did.
The Daewoo-to-Doosan transition was a rebrand, not a re-engineering. The OEM part numbering system established for Daewoo forklifts before 2007 remains active under Doosan today. A part number from a 1998 service manual retrieves the identical component in a current Doosan catalog. The catalog grew; the existing numbers did not change.
When to Buy Daewoo or Doosan Parts From a Specialist Supplier
Not every Daewoo or Doosan forklift needs a specialist supplier. But these scenarios consistently favor one:
- Out-of-warranty trucks. Once the equipment warranty expires, dealer pricing for branded forklift parts climbs. A specialist offering OEM-compatible replacements cuts per-part cost while matching the form, fit, and function of the original.
- Mixed-brand fleets. A warehouse running Daewoo, Toyota, and Clark trucks in the same bay does not need three separate parts vendors. A single-source supplier covering 14 major brands consolidates ordering, invoicing, and shipping into one workflow.
- Bulk sourcing for PM cycles. Fleet managers forecasting quarterly maintenance save on per-unit cost by ordering parts in sets rather than singles. A specialist handling volume orders quotes faster than a general distributor filling one-off requests.
- Hard-to-match older models. Earlier Daewoo-branded forklifts fall outside many current parts catalogs. A supplier running a dedicated Daewoo forklift parts Doosan cross reference lookup catches part-number transitions a generic catalog misses.
The common thread across these signals is time. A specialist who already knows the Daewoo-to-Doosan part-number bridge removes the cross-reference work from the fleet manager’s plate. That savings compounds across a multi-unit operation where every hour of downtime carries a real cost.
A specialist forklift-parts supplier that covers 14 major brands removes the Daewoo-to-Doosan cross-reference work entirely. The single-source model consolidates ordering for mixed-brand fleets and catches part-number transitions a generic catalog misses, which matters most for pre-2007 Daewoo trucks that fall outside newer catalogs. After five years of sourcing forklift parts across the Daewoo-Doosan-Bobcat lineage, our parts specialists have cataloged the full prefix-family mapping (A-series, D-series, numeric) that makes cross-referencing a single-step lookup rather than a multi-catalog search.
Frequently Asked Questions
Q: Are Daewoo and Doosan forklift parts the same? Yes. Both brands share an identical OEM numbering system that carried through the 1998 acquisition and 2007 rebrand unchanged. A Daewoo A218761 is literally a Doosan A218761, no conversion needed. Parts suppliers list these as "DOOSAN – DAEWOO [number]" in a single inventory row, not as two separate SKUs.
Q: How do I find the part number for my Daewoo forklift? Locate the nameplate on your forklift (dashboard, engine compartment, or frame rail near the counterweight), note the model and serial number, then look up the part in a Daewoo/Doosan catalog. Part numbers follow an A######/D###### or numeric format. The exploded diagrams in the parts catalog PDF map every component to its OEM number.
Q: Where is the serial number on a Doosan forklift? Check the data plate on the dashboard first (visible from the operator’s seat on most models). If absent, look inside the engine compartment on the cover interior and firewall. As a last check, inspect the left-side frame rail near the counterweight, just forward of the rear axle. The serial number is printed alongside the model designation and year of manufacture.
Q: When did Daewoo forklifts become Doosan? Doosan Group acquired Daewoo Heavy Industries in 1998 during the post-Asian-financial-crisis restructuring. The parent company was renamed Doosan Infracore in 2005, and the forklift division fully rebranded to Doosan by 2007. Catalogs still list entries as "DOOSAN – DAEWOO" to cover both eras, and the part-numbering system has remained continuous throughout.
Q: Can I use Doosan parts on a Daewoo forklift? Yes. The numbering system is identical across both brand labels, which makes a daewoo forklift parts doosan cross reference straightforward. A Daewoo-badged D25S-3 and a Doosan-badged D25S-5 use identical OEM part numbers where the chassis carried forward. The same part fits equipment from either production era, and the 2023 Bobcat rebrand adds a third badge to the same catalog.
Q: Are Bobcat forklifts the same as Doosan forklifts? Bobcat forklifts from 2023 onward are rebadged Doosan machines, first appearing in South Africa via the Goscor Lift Trucks network before expanding in 2024. Recent-model parts interchange. Pre-2023 Bobcat models predate the rebranding, so verify compatibility with your supplier before ordering.
Q: What engine is in a Daewoo Doosan forklift? Common engines include the Daewoo DC24, D427, D439, and D1146TI. Doosan continued using Daewoo-designed engines in many models through the transition, so engine parts for older units stay available under Doosan part numbers. The A-series prefix (A218761, A273765) covers most engine and drivetrain components.
Q: Do aftermarket forklift parts offer the same durability as genuine parts? It depends on the tier. OEM-equivalent aftermarket parts (made by manufacturers who supply the OEM channel) approach genuine durability at 20 to 40 percent lower cost, typically with a 6-month warranty. Economy-grade components trade longevity for a lower purchase price and carry roughly a 3-month warranty. The warranty spread, from 12 months for OEM genuine to as-is for used parts, tracks a real reliability gradient.
Some brand transitions create part-number chaos. The Daewoo-to-Doosan handoff defied that pattern: a shared OEM numbering architecture means a daewoo forklift parts doosan cross reference amounts to reading the same number twice. Catalogs list both names across decades of production, and aftermarket suppliers reference the same unified system for OEM-equivalent and economy-tier replacements alike.
Conclusion: The Bottom Line for Your Daewoo or Doosan Forklift
The Daewoo-to-Doosan transition created confusion that outlasted the badge change by nearly a decade, but the underlying parts system never split. Daewoo and Doosan industrial forklifts share one OEM parts catalog: A-series engine and drivetrain codes, D-series steering and hydraulic codes, and a single alphanumeric numbering convention that makes every original Daewoo part number a valid Doosan part number today.
Bottom line: If you know your forklift’s model, serial number, and the part number printed on the nameplate, you can source that component across four quality tiers without paying extra for brand ambiguity.
The lookup workflow is straightforward: read the part number off the truck, match it against your model and serial, then buy from a supplier that stocks both Daewoo and Doosan references. A single-source supplier that covers both badges removes the guesswork from cross-referencing and keeps pricing transparent across OEM, OEM-equivalent, aftermarket, and used tiers.
References
- Wikipedia contributors. (n.d.). Doosan Group. In Wikipedia, The Free Encyclopedia. Retrieved August 11, 2026, from https://en.wikipedia.org/wiki/Doosan_Group
- Wikipedia contributors. (n.d.). Doosan Infracore. In Wikipedia, The Free Encyclopedia. Retrieved August 11, 2026, from https://en.wikipedia.org/wiki/Doosan_Infracore
- Wikipedia contributors. (n.d.). Bobcat Company. In Wikipedia, The Free Encyclopedia. Retrieved August 11, 2026, from https://en.wikipedia.org/wiki/Bobcat_Company
- Practical Machinist. (n.d.). Anyone know what year Daewoo forklifts became Doosan? [Online forum post]. Practical Machinist. Retrieved August 11, 2026, from https://www.practicalmachinist.com/forum/threads/anyone-know-what-year-daewoo-forklifts-became-doosan.333176/
Last reviewed and updated: August 2026. Author: Kingstream team. For tailored guidance, contact our team.