Forklift Throttle Controller YDJS-1210 - 12V 0-10V - Kingstream Forklift Parts

Forklift Throttle Controller YDJS-1210 – 12V 0-10V

$24.00

YDJS-1210 0-10V electronic throttle controller accelerator for forklifts. Stainless steel construction, 0.75 kg. Compatible with HELI, Toyota, Komatsu, TCM, Mitsubishi and more. Fast shipping from Kingstream.

SKU YDJS-1210 Category

Forklift Throttle Controller YDJS-1210 — 12V Input 0-10V Output Electronic Accelerator for Electric Forklifts

This forklift throttle controller model YDJS-1210 is a Kingstream OEM 12V input 0-10V output electronic accelerator for electric forklift trucks. The YDJS-1210 converts a 12V DC power supply input into a proportional 0-10V analog output signal that interfaces with the forklift motor controller throttle input — the output voltage increases linearly as the pedal is pressed, providing precise speed control. 0.7kg with compact 15×12×10cm packaging. 1-year warranty. Kingstream OEM quality for electric forklift fleet operators.

Installing the YDJS-1210 throttle controller requires connecting the 12V DC power input to a regulated 12V supply from the forklift’s DC-DC converter or auxiliary battery, connecting the ground wire, and connecting the 0-10V analog output signal to the motor controller’s throttle input pin. The 0-10V output provides a higher signal-to-noise ratio than 0-5V systems — the wider voltage range means the controller can distinguish smaller pedal position changes for smoother speed control. After wiring, power the system and verify the output voltage sweeps linearly from approximately 0V at rest (fully released) to 10V at full throttle without dead spots, jumps, or erratic readings using a digital multimeter on the signal output wire. The motor controller must be calibrated for the specific voltage range — most controllers auto-calibrate by learning the minimum and maximum voltages when the pedal is cycled from full release to full press during the calibration procedure. A failing YDJS-1210 throttle typically shows progressive symptoms: first, a narrow dead band at the top of the pedal travel where pushing further produces no additional speed increase; then erratic speed control as the output signal becomes noisy; and finally complete loss of throttle response if the internal power supply fails. 1-year warranty covers the throttle controller electronics and output regulation circuitry.


Technical Specifications

Parameter Value
Model YDJS-1210
Type Electronic Throttle Controller
Input 12V DC
Output 0-10V Analog
Weight 0.7 kg

1-year warranty. Kingstream OEM. For bulk orders, contact us.

Reviews

There are no reviews yet.

Be the first to review “Forklift Throttle Controller YDJS-1210 – 12V 0-10V”

Your email address will not be published. Required fields are marked *

⏱ Only required fields (marked *) are necessary

Request Forklift Parts Quotation

Share your inquiry details to get faster part confirmation, more accurate pricing and better support for dealer, fleet and bulk purchase requirements.

📦 Part Number

If you already have the OEM number or reference number, quotation and matching will usually be much faster.

🚜 Forklift Model or Serial

If the exact part number is not available, forklift model details can help narrow the correct product range.

📸 Product Photos

Clear old-part photos, labels or packaging images are useful when buyers need help confirming the correct part.

🌍 Quantity & Destination

Quantity, country and shipping terms help improve quotation structure for EXW, FOB or CIF comparison.

Send Your Forklift Parts Inquiry

⚡ Fill in the most relevant information available. Clear inquiries help improve quotation speed and accuracy.
📋 Contact Information
📋 Parts Information
Provide part number OR forklift model for faster matching

📌 Why this matters
Well-structured inquiries usually receive faster response, fewer matching errors and more practical quotation support for wholesale and export orders.

* Required fields. We'll reply within 24h.
Scroll to Top