Original Factory Alternator Type JF131X Forklift Prat Forklift Electric Motor - Kingstream Forklift Parts

Original Factory Alternator Type JF131X Forklift Prat Forklift Electric Motor

$79.99

JF131X series factory-original forklift alternator for 1-3.5 ton IC forklifts. Copper windings, cast aluminum housing, IC voltage regulator. Fits Heli, Hangcha, TCM, Toyota, Komatsu and other Asian-manufactured lift trucks.

SKU JF131X Categories ,

JF131X Series Forklift Alternator — Factory Original Replacement

The JF131X is a widely used factory-original forklift alternator (generator) that provides reliable 14V charging output for 1-3.5 ton internal combustion lift trucks. As a JF-series alternator produced to OEM specifications, this unit is the go-to replacement for many Chinese and Asian-manufactured forklift models. The JF131X converts engine rotational energy into regulated DC electrical power, keeping the battery charged and supplying consistent voltage to all onboard systems — ignition, lighting, dash instrumentation, and auxiliary controls. A worn alternator with weak output can cause slow cranking, dim headlights, ECU brownout errors, and battery deep-discharge that leaves your forklift dead at the worst possible moment.

This alternator is built with high-purity copper stator windings and a dynamically balanced rotor for smooth operation with minimal vibration across the working RPM range. The cast aluminum housing is engineered with integrated heat-sink fins for efficient thermal management in the tight, hot engine compartments typical of counterbalance forklifts. An internal IC voltage regulator provides stable charging output regardless of engine speed or electrical load fluctuations, protecting the battery and electronic components from overvoltage stress. Heavy-duty rectifier diodes and permanently sealed ball bearings ensure consistent, maintenance-free performance over thousands of hours of continuous industrial operation.

Compatible across a broad range of forklift brands including Heli, Hangcha, TCM, Toyota, and Komatsu 1-3.5 ton diesel and LPG models that specify a JF131X-type alternator. This unit also serves as a replacement for compact construction equipment, industrial sweepers, and utility vehicles sharing the same alternator form factor. Inspect belt tension, terminal connections, and output voltage every 500 operating hours for maximum service life. Browse more alternator options in our forklift generator category. Cross-reference OEM fitment data at Heli official website.


Technical Specifications

  • SKU: JF131X
  • Voltage: 14V
  • Type: Forklift Alternator / Generator (JF Series)
  • Material: Cast Aluminum Housing / Copper Windings
  • Fitment: Universal JF131X-Type Forklift Applications
  • Application: 1-3.5 Ton Diesel & LPG Forklifts

Compatible Forklift Brands

Brand Models / Series
Heli CPCD10-CPCD35 (1-3.5 Ton)
Hangcha CPCD10-CPCD35 Series
TCM FG15-FG30, FD15-FD30 Series
Komatsu / Toyota 1-3 Ton IC Forklifts

Every Kingstream JF131X alternator is dyno-tested before shipment — output voltage curve, load response, and regulator stability are verified against factory specifications. Each unit is vacuum-packed in anti-static barrier film, secured in custom foam inserts within double-wall export cartons, and shipped with desiccant packs for moisture protection during ocean freight. 12-month replacement warranty included, with technical support available through our global distributor network. Contact us for bulk order pricing, private label OEM service, or compatibility confirmation for your specific forklift model.

Reviews

There are no reviews yet.

Be the first to review “Original Factory Alternator Type JF131X Forklift Prat Forklift Electric Motor”

Your email address will not be published. Required fields are marked *

WHY BUYERS TRUST US

Accurate Part Matching

Send us the OEM number, a photo, or the forklift model. We cross-match before quotation to eliminate wrong-part risk.

Checked Before Packing

Every part is visually and dimensionally inspected. We confirm specifications match your request before export.

Trial Orders & Global Shipping

Single-piece trials welcome. Mixed orders consolidated. We pack for sea, air, or urgent courier — worldwide.

WHY BUYERS WORK WITH US
01

Full Category Coverage

One supplier for all forklift systems — engine, hydraulic, electrical, mast, brake, undercarriage. No need to juggle multiple vendors.

02

No Minimum Order

Trial orders welcome. Single-piece to bulk supply. You test first, scale later. We treat every order seriously.

03

Three Quality Choices

Original, OEM, or Aftermarket. You decide based on budget and application. We don't upsell — you control cost and performance.

04

Direct 1-on-1 Communication

You talk to the sourcing decision maker. No sales reps, no forwarding. Faster answers, clearer quotes, real accountability.

05

Mixed Order Consolidation

Combine different parts in one shipment. Save on freight. We handle the picking, packing, and export documentation.

06

After-Sale Warranty

Manufacturing defects covered. Free replacement or credit arranged quickly. Your trust is worth more than any single transaction.

OEM CROSS REFERENCE

Same part, different brand numbers. This cross-reference table helps you confirm compatibility across multiple forklift brands. If your brand or part number is not listed, send it to us — we will match it.

Brand OEM Part Number Notes
TOYOTA 47201-23300 Original
KOMATSU 3EB-30-41200 Original
HELI 24022-83011 Original
HANGCHA R240-83011 Original / OEM
LINDE 0009830123 OEM
HYSTER H47201-233 OEM
TCM TCM-47201 OEM
AFTERMARKET AM-47201 Cost-effective replacement
💡 Don't see your brand or part number? This table shows common cross-references. We can match many more brands by your OEM number, old part photo, or forklift model. Send us what you have — we'll find the correct part.
HOW TO INQUIRE

Follow these four steps to get the fastest and most accurate quotation. The more details you provide, the quicker we can confirm compatibility and pricing.

1

Send Your Part Number or Forklift Information

Provide the OEM part number, a clear photo of the old part, or the forklift brand and model. Any one of these works. We'll use it to cross-match the correct part.

2

Tell Us Your Quality Preference and Quantity

Choose Original, OEM, or Aftermarket quality. Let us know how many pieces you need — a single trial unit or a bulk order. We'll quote accordingly.

3

Provide Your Destination and Shipping Preference

Tell us the destination country and preferred shipping method (sea freight, air freight, or express courier). This helps us calculate delivery time and cost accurately.

4

Combine Related Parts (Optional)

If you need other forklift parts, include them in the same inquiry. We support mixed order consolidation — less freight cost, less paperwork.

💡 Recommended inquiry format: Send the part number, forklift model, quantity, quality preference, and destination country in one message. We'll reply with a complete quotation, usually within 24 hours.
COMMON QUESTIONS
Absolutely. We welcome single-piece trial orders for most maintenance parts. You can verify quality and fit before committing to a larger quantity. No pressure, no minimum order.
Send us the OEM part number printed on your old part, a clear photo of the component, or your forklift brand and model. We cross-match before quotation to ensure the correct fit.
We supply three quality tiers: Original (same as factory-fitted), OEM (equivalent specification, competitive pricing), and Aftermarket (cost-effective for older trucks). You choose based on your budget and application.
Yes. All parts come with a standard replacement warranty against manufacturing defects. If any issue occurs during the warranty period, contact us with details — we arrange a free replacement or credit quickly.
Yes. We support mixed order consolidation. You can send multiple part numbers together, and we'll pack them in one shipment to save on freight costs. Just include all part numbers in your inquiry.

Request Forklift Parts Quotation

Share your inquiry details to get faster part confirmation, more accurate pricing and better support for dealer, fleet and bulk purchase requirements.

📦 Part Number

If you already have the OEM number or reference number, quotation and matching will usually be much faster.

🚜 Forklift Model or Serial

If the exact part number is not available, forklift model details can help narrow the correct product range.

📸 Product Photos

Clear old-part photos, labels or packaging images are useful when buyers need help confirming the correct part.

🌍 Quantity & Destination

Quantity, country and shipping terms help improve quotation structure for EXW, FOB or CIF comparison.

Send Your Forklift Parts Inquiry

⚡ Fill in the most relevant information available. Clear inquiries help improve quotation speed and accuracy.
📋 Contact Information
📋 Parts Information
Provide part number OR forklift model for faster matching

📌 Why this matters
Well-structured inquiries usually receive faster response, fewer matching errors and more practical quotation support for wholesale and export orders.

* Required fields. We'll reply within 24h.
© Forklift Parts Quotation — Designed for fleet & export buyers
Scroll to Top