Part Number A3000-603010-000 A30-A35 Forklift Hydraulic Oil Suction Filter Forklift Parts

HELI A30/A35 Hydraulic Oil Suction Filter A3000-603010-000

The A3000-603010 suction filter is an in-tank hydraulic suction strainer designed for HELI A30 and A35 series 3-3.5 ton diesel forklifts, positioned at the pump inlet inside the hydraulic reservoir. Unlike return-line or pressure filters that handle post-component oil, a suction filter protects the pump itself — stopping large debris, weld slag, seal fragments, and rust flakes from the tank from entering the gear pump and causing immediate cavitation damage, scored gear faces, or seized shaft bearings. The A3000-603010-000 OEM part number specifies the exact mounting flange, mesh rating, and flow capacity required for the HELI A30/A35 hydraulic circuit.

Built as a wire-mesh strainer element with a robust steel frame, this A3000-603010 suction filter is engineered for low flow restriction on the inlet side — excessive suction-side pressure drop causes pump cavitation, a condition that erodes gear teeth and pump housing surfaces within hours of operation. The mesh rating is optimized to pass full system flow at cold-start oil viscosity while still capturing particles large enough to damage the pump. The mounting flange matches the HELI A30/A35 tank top-plate bolt pattern with integrated sealing to prevent air ingress into the suction line.

Direct OEM fit for HELI CPCD30 (A30) and CPCD35 (A35) 3T/3.5T diesel forklifts equipped with the standard hydraulic tank configuration. Also fits Hangcha and Dalian 3T-3.5T models sharing the HELI-architecture hydraulic tank. Clean or replace at every hydraulic oil change (1,000-2,000 hours). For return filters, pressure filters, and other hydraulic components, visit our forklift hydraulic filter category.

Technical Specifications

• SKU / OEM PN: A3000-603010-000
• Type: In-tank hydraulic suction strainer
• Circuit Position: Pump inlet (suction side)
• Filter Media: Wire mesh strainer element
• Frame: Steel frame, corrosion-resistant
• Mounting: Tank top-plate flange, bolt-on
• Flow Characteristic: Low restriction (anti-cavitation)
• Service Interval: Clean/replace at hydraulic oil change

Compatible Forklift Brands

Each A3000-603010 suction filter ships clean and ready to install. Never operate the hydraulic pump with a clogged or collapsed suction strainer — cavitation damage occurs within minutes. For application-specific specifications, consult Baldwin Filters. Kingstream stocks the A3000-603010 for same-day dispatch with worldwide online tracking.