Part Number 24C7-50301 Hydraulic Oil Forklift Filter Forklift Parts Oil Filter for Forklift

Hyundai Forklift Hydraulic Oil Filter 24C7-50301

The 24C7-50301 hydraulic filter is an OEM-specification hydraulic oil filter for Hyundai forklifts, cross-referencing to Hyundai Heavy Industries part number 24C7-50301 used across the 20/25/30/33D-7 and 15/18/20BT-7 series. Hyundai hydraulic systems operate at working pressures up to 3,000 PSI with flow rates that demand a filter element rated for both high dirt-holding capacity and low pressure drop — using a generic aftermarket filter with different bypass calibration or burst pressure can cause pressure oscillations that prematurely fatigue the main hydraulic pump shaft seal and multi-way control valve O-rings.

This replacement 24C7-50301 hydraulic filter features a heavy-gauge steel canister rated for Hyundai system pressures and a high-efficiency pleated cellulose-blend media that captures metallic wear debris, seal fragments, and fine silt before they enter the main gear pump. The calibrated bypass valve opens only under cold-start viscosity conditions or full contaminant loading, while the anti-drain-back configuration ensures the filter stays primed between operating cycles — important for Hyundai forklifts that cycle frequently in port and warehouse applications.

Direct OEM cross-reference: 24C7-50301. Fits Hyundai 20D-7, 25D-7, 30D-7, 33D-7 diesel forklifts and 15BT-7, 18BT-7, 20BT-7 LPG forklifts. Also compatible with Doosan forklifts sharing the Hyundai hydraulic architecture. Replace every 500 hours or at the hydraulic oil change interval. For suction strainers, return filters, and other hydraulic system parts, visit our forklift hydraulic filter category.

Technical Specifications

• SKU / OEM PN: 24C7-50301
• Brand Fitment: Hyundai / Doosan forklifts
• Type: Spin-on hydraulic oil filter
• Filter Media: High-efficiency pleated cellulose blend
• Housing: Heavy-gauge steel, corrosion-resistant coating
• Bypass Valve: Calibrated for Hyundai hydraulic pressure
• Anti-Drain Valve: Built-in, keeps filter primed
• Service Interval: 500 hours or at hydraulic oil change

Compatible Forklift Brands

Each 24C7-50301 hydraulic filter ships factory-sealed. Verify correct thread pitch before installation — Hyundai hydraulic filters use a specific thread size distinct from engine oil filter threads. For cross-reference validation, consult Baldwin Filters. Kingstream stocks the 24C7-50301 for same-day dispatch with worldwide online tracking.