Forklift ECU 16A46-02060 – Mitsubishi NT

Forklift ECU 16A46-02060 — Engine Control Unit Computer Board for Mitsubishi NT Forklift Trucks

This forklift ECU part number 16A46-02060 is an Kingstream OEM engine control unit computer board designed specifically for Mitsubishi NT series forklift trucks. The ECU is the central electronic control module that manages critical engine functions — receiving sensor inputs from the crankshaft position sensor, throttle position sensor, coolant temperature sensor, manifold pressure sensor, and oxygen sensor, then calculating and outputting the precise fuel injection timing, fuel quantity, ignition timing, and idle speed control signals to the engine actuators. A failed ECU causes the forklift engine to either not start at all (no fuel injection or ignition signal output), run in a degraded limp-home mode with severely reduced power, or exhibit erratic behavior including sudden stalling, rough idle, and intermittent power loss. The 16A46-02060 is a direct plug-in replacement for the factory ECU on Mitsubishi NT forklifts. Each unit undergoes 100% professional testing before shipment with carton box packaging and 7-10 day delivery. 0.86kg net weight with 28×18×5cm packaging. Machinery test report provided.

Installing the 16A46-02060 ECU requires disconnecting the battery, locating the existing ECU (typically mounted in the engine bay or under the dashboard), and swapping the replacement unit into the same wiring harness connector. The ECU connector is keyed to prevent incorrect orientation. After installation, the ECU may require a brief learning period where it adapts to the specific engine sensors and actuators — allow the engine to idle for 5-10 minutes and then test under load before returning the forklift to normal operation. If the engine does not start after ECU replacement, verify all sensor connectors are fully seated and the battery voltage is above 12V. Some Mitsubishi NT models may require ECU reprogramming with the vehicle-specific calibration data.

Browse our Forklift ECU category for additional engine control units. For fleet orders, contact us.

Technical Specifications

Compatible Forklift Models

100% professional tested. Carton box packaging. Machinery test report provided. For bulk orders, contact us.