Linde Floormat 3224313003 — OEM Cab Floor Mat for Linde H-Series Forklift

The Linde floormat part number 3224313003 is an OEM-spec cab floor mat engineered for Linde H-series diesel and LPG counterbalance forklifts. This molded rubber floor covering fits the operator compartment floor pan, providing anti-slip foot traction, vibration dampening, and sound insulation in the pedal area. Over 10,000-15,000 operating hours, the original floormat wears through at the heel pivot point under the accelerator and brake pedals — the constant pressure point where the operator pivots their right foot between pedals during forward-reverse shuttle operations. A worn-through floormat exposes the bare metal floor pan, creating a slip hazard from wet or oily boot soles and transmitting engine vibration directly through the operator foot platform, contributing to operator fatigue during multi-shift operations.

This OEM-quality replacement is molded from EPDM rubber compound with a textured diamond-plate surface pattern for maximum wet-traction performance. The EPDM material is specifically selected for its resistance to diesel fuel, hydraulic oil spills, and UV degradation — three environmental factors that cause generic PVC and natural rubber mats to crack, harden, and curl at the edges within 2-3 years of outdoor forklift operation. The mat is precision die-cut to match the Linde H-series footwell contours including the pedal cutouts, transmission tunnel clearance, and floor pan drain hole locations. Integrated molded locating pins and edge lips secure the mat in position without adhesive — the mat can be lifted out for floor pan cleaning during scheduled maintenance without tools.

Direct OEM replacement for Linde part number 3224313003. Compatible with Linde H20, H25, H30, H35 diesel and LPG forklifts. Also suitable for Linde H40-H50 series where the same floor pan stamping is used. For other Linde cab interior components including seat covers, headliners, and control lever boots, browse our other forklift body parts category.

Technical Specifications

• OEM / Part Number: 3224313003 (Linde)
• Type: Molded cab floor mat / anti-slip footwell liner
• Material: EPDM rubber compound
• Surface Pattern: Textured diamond-plate, anti-slip
• Chemical Resistance: Diesel fuel, hydraulic oil, UV exposure
• Fitment: Precision die-cut for Linde H-series footwell
• Features: Integrated pedal cutouts, drain hole clearance, locating pins
• Installation: Drop-in, no adhesive required, removable for cleaning
• Benefits: Vibration dampening, sound insulation, operator fatigue reduction
• Quality: OEM-spec replacement, aftermarket equivalent

Compatible Linde Forklift Models

Each Linde floormat ships rolled in protective packaging — lay the mat flat for 2-4 hours at room temperature before installation to allow the EPDM material to relax from shipping compression. After installation, verify the mat does not interfere with full accelerator and brake pedal travel — any restriction can prevent the brake pedal from reaching the full-stroke position required for the brake light switch to activate, a safety compliance issue. Clean the mat quarterly with mild detergent and water; avoid solvent-based cleaners that can leach plasticizers from the EPDM and accelerate surface hardening. For Linde parts cross-references and cab component compatibility, consult Baldwin Filters. Kingstream stocks Linde 3224313003 floormats for same-day dispatch — worldwide shipping with online tracking.