3-7 Ton Forklift Hydraulic Oil Tanks Steering Boxes Forklift Parts Heli Forklift Steering Cylinder
$89.99
HELI Steering Cylinder for CPCD30-70 3T-7T forklifts. Double-acting horizontal rear axle mount with chrome rod and PU lip seals. Check tie rod ends when replacing. Worldwide freight from Kingstream.
HELI Steering Cylinder for 3-7 Ton Forklift
The HELI steering cylinder is a double-acting hydraulic cylinder that converts hydraulic pressure from the steering orbitrol into left and right wheel movement on HELI 3-7 ton forklifts. Unlike tilt cylinders that control mast angle, the steering cylinder is mounted horizontally across the rear axle and connects to the steering knuckles via tie rods — when the operator turns the steering wheel, the orbitrol meters oil to one side of the steering cylinder piston while releasing oil from the other side, pushing or pulling the tie rods to steer the wheels. A HELI steering cylinder with worn internal piston seals causes steering wheel free play at highway speeds in the warehouse, requiring the operator to turn the wheel further before the wheels respond, and producing wandering or lane drift during travel.
Built to HELI OEM specification for 3-7T CPCD series forklifts, this HELI steering cylinder features a honed steel cylinder bore, a hard-chrome plated piston rod with double-acting polyurethane lip seals on both the piston and rod gland, and a rod wiper to prevent dust and debris ingress. The mounting configuration uses trunnion or clevis mounts matched to the HELI rear axle steering linkage. A bent piston rod on a steering cylinder causes binding at certain steering angles and uneven rod seal wear that leads to external oil leaks. For steering orbitrols, hydraulic pumps, and seals, browse our forklift hydraulic components.
Technical Specifications
- SKU: STEER-CYL-3-7T
- Type: Double-acting steering cylinder
- Position: Rear axle, horizontal mount
- Cylinder Body: High-strength steel, honed bore
- Piston Rod: Hard-chrome plated
- Seals: Double-acting PU lip seals, rod wiper
- Operating Pressure: 1,500-2,500 PSI
- Fitment: HELI CPCD30-70 3T-7T diesel forklifts
Compatible Forklift Brands
| Brand | Models / Series |
|---|---|
| HELI | CPCD30, CPCD35, CPCD40, CPCD50, CPCD60, CPCD70 (3T-7T) |
| Hangcha | CPCD30-70 series, HELI-architecture steering |
| Dalian | CPCD 3T-7T, HELI-architecture steering |
Each HELI steering cylinder ships with ports plugged and rod protected. After installation, bleed the steering circuit by turning the steering wheel lock-to-lock several times at low engine speed until steering effort is consistent and the wheel returns smoothly to center. Check the tie rod ends for wear and replace if necessary — a new steering cylinder connected to worn tie rod ends will not restore precise steering. For HELI steering system specifications, consult Baldwin Filters. Kingstream stocks HELI steering cylinders — worldwide freight shipping with online tracking.
Brand
HELI
LINDE
Full Category Coverage
One supplier for all forklift systems — engine, hydraulic, electrical, mast, brake, undercarriage. No need to juggle multiple vendors.
No Minimum Order
Trial orders welcome. Single-piece to bulk supply. You test first, scale later. We treat every order seriously.
Three Quality Choices
Original, OEM, or Aftermarket. You decide based on budget and application. We don't upsell — you control cost and performance.
Direct 1-on-1 Communication
You talk to the sourcing decision maker. No sales reps, no forwarding. Faster answers, clearer quotes, real accountability.
Mixed Order Consolidation
Combine different parts in one shipment. Save on freight. We handle the picking, packing, and export documentation.
After-Sale Warranty
Manufacturing defects covered. Free replacement or credit arranged quickly. Your trust is worth more than any single transaction.
Same part, different brand numbers. This cross-reference table helps you confirm compatibility across multiple forklift brands. If your brand or part number is not listed, send it to us — we will match it.
| Brand | OEM Part Number | Notes |
|---|---|---|
| TOYOTA | 47201-23300 | Original |
| KOMATSU | 3EB-30-41200 | Original |
| HELI | 24022-83011 | Original |
| HANGCHA | R240-83011 | Original / OEM |
| LINDE | 0009830123 | OEM |
| HYSTER | H47201-233 | OEM |
| TCM | TCM-47201 | OEM |
| AFTERMARKET | AM-47201 | Cost-effective replacement |
Follow these four steps to get the fastest and most accurate quotation. The more details you provide, the quicker we can confirm compatibility and pricing.
Send Your Part Number or Forklift Information
Provide the OEM part number, a clear photo of the old part, or the forklift brand and model. Any one of these works. We'll use it to cross-match the correct part.
Tell Us Your Quality Preference and Quantity
Choose Original, OEM, or Aftermarket quality. Let us know how many pieces you need — a single trial unit or a bulk order. We'll quote accordingly.
Provide Your Destination and Shipping Preference
Tell us the destination country and preferred shipping method (sea freight, air freight, or express courier). This helps us calculate delivery time and cost accurately.
Combine Related Parts (Optional)
If you need other forklift parts, include them in the same inquiry. We support mixed order consolidation — less freight cost, less paperwork.
Request Forklift Parts Quotation
📦 Part Number
If you already have the OEM number or reference number, quotation and matching will usually be much faster.
🚜 Forklift Model or Serial
If the exact part number is not available, forklift model details can help narrow the correct product range.
📸 Product Photos
Clear old-part photos, labels or packaging images are useful when buyers need help confirming the correct part.
🌍 Quantity & Destination
Quantity, country and shipping terms help improve quotation structure for EXW, FOB or CIF comparison.
Reviews
There are no reviews yet.