Forklift Kingpin 24234-32181 185x25mm – 1-1.8T Steering

Forklift Steering Kingpin / Vertical Shaft 24234-32181 — 185×25mm for 1-1.8 Ton Forklift Steering Knuckle

This forklift kingpin part number 24234-32181 (185×25mm) is a Kingstream OEM steering knuckle vertical shaft for 1-1.8 ton forklift trucks in manufacturing, construction, port, warehousing, and material handling. The kingpin — also called vertical shaft or main pin — is the pivot pin that connects the steering knuckle to the rear axle beam, allowing the knuckle to rotate for rear wheel steering. 0.67kg with 50×20×10cm carton box packaging. 100% professional tested. 7-15 day delivery. Kingstream OEM for 1-1.8 ton forklift fleet steering knuckle maintenance.

KINGPIN FUNCTION: The kingpin passes through precision-machined bores in both the axle beam and steering knuckle, with bronze or steel bushings providing the bearing surface. When the steering cylinder pushes or pulls the tie rod, the knuckle pivots on the kingpin to change wheel angle. A worn kingpin causes loose steering, uneven tire wear, and clunking noises. The 185×25mm dimensions are critical for correct fit — verify these measurements match your forklift before ordering. For 1-1.8 ton forklift fleet steering maintenance, contact us. Kingstream OEM.

INSTALLATION: Jack up rear of forklift, remove wheel, disconnect tie rod, remove kingpin retaining bolt, drive out old kingpin with a hammer and drift, clean kingpin bore, install new kingpin with new bushings if needed, secure retaining bolt, reconnect tie rod, install wheel, verify smooth steering without binding. For 1-1.8 ton forklift fleet maintenance, contact us. Kingstream OEM.

Technical Specifications

100% professional tested. Kingstream OEM. Contact us.