Rear Hub Cap Wheel Cover
$11.00
Stamped iron rear hub cap wheel cover for 30HB forklift models. Protects rear wheel hub bearings from dust, debris, and moisture. Impact-resistant iron construction — prevents premature bearing failure from contaminant ingress. Direct bolt-on installation.
Rear Hub Cap Wheel Cover — Iron Dust Shield for Forklift Wheel Hubs
This rear hub cap wheel cover is a stamped iron dust shield designed to protect the rear wheel hub assembly on forklifts from dust, debris, moisture, and workshop contaminants. Installed over the outer face of the rear hub, it prevents abrasive particles from entering the bearing cavity and wheel seal area — a primary cause of premature bearing failure and seal leakage on forklifts operating in dusty warehouses, construction yards, and concrete plants. The iron construction provides impact resistance against accidental bumps from pallets, debris, and curbs that would crack a plastic hub cap. This cover is compatible with 30HB series forklift models and similar rear hub configurations. If your forklift’s original hub cap is dented, missing, or allowing grease leakage around the hub face, replace it promptly — an exposed hub bearing collects contaminants rapidly and can fail within weeks of continuous operation without protection.
Installing a rear hub cap cover is straightforward but requires attention to the mounting surface. Clean the hub face thoroughly before installation — any rust, old gasket material, or dried grease trapped under the new cover creates an uneven seal that allows moisture ingress. Apply a thin bead of silicone gasket maker or RTV sealant around the hub mating surface if the original gasket is missing or deteriorated. On 30HB forklifts, the hub cap is typically secured with 3 or 4 bolts around the perimeter; torque them in a star pattern to 10-15 Nm to avoid warping the stamped iron cap. Over-tightening deforms the cap edge and breaks the seal, defeating the purpose of the dust cover. After installation, check for gaps between the cap and hub face by running a feeler gauge around the perimeter — any gap larger than 0.2mm will admit dust. Common failure signs include grease seepage around the cap edge, a rattling noise from loose mounting bolts, and visible rust staining on the hub face where water has penetrated past the cover.
This hub cap fits 30HB series forklifts and similar rear hub configurations. For dimensional confirmation — including bolt circle diameter and hub face diameter — contact our sales team with your forklift model number. Browse our Wheel Hub Cap category for front hub caps, bearing kits, and wheel seals. For OEM hub specifications, visit HELI Forklift official site.
Technical Specifications
| Parameter | Value |
|---|---|
| Material | Stamped Iron |
| Color | Black |
| Weight | 0.12 kg |
| Application | 30HB Forklift Rear Hub |
| Condition | New |
Compatible Forklift Models
| Brand | Models |
|---|---|
| HELI / Hangcha | 30HB Series Rear Wheel Hub |
Each hub cap cover is inspected for stamping quality and dimensional accuracy before shipment. Standard export carton packaging. For bulk orders or custom specifications, contact us with your requirements.
Full Category Coverage
One supplier for all forklift systems — engine, hydraulic, electrical, mast, brake, undercarriage. No need to juggle multiple vendors.
No Minimum Order
Trial orders welcome. Single-piece to bulk supply. You test first, scale later. We treat every order seriously.
Three Quality Choices
Original, OEM, or Aftermarket. You decide based on budget and application. We don't upsell — you control cost and performance.
Direct 1-on-1 Communication
You talk to the sourcing decision maker. No sales reps, no forwarding. Faster answers, clearer quotes, real accountability.
Mixed Order Consolidation
Combine different parts in one shipment. Save on freight. We handle the picking, packing, and export documentation.
After-Sale Warranty
Manufacturing defects covered. Free replacement or credit arranged quickly. Your trust is worth more than any single transaction.
Same part, different brand numbers. This cross-reference table helps you confirm compatibility across multiple forklift brands. If your brand or part number is not listed, send it to us — we will match it.
| Brand | OEM Part Number | Notes |
|---|---|---|
| TOYOTA | 47201-23300 | Original |
| KOMATSU | 3EB-30-41200 | Original |
| HELI | 24022-83011 | Original |
| HANGCHA | R240-83011 | Original / OEM |
| LINDE | 0009830123 | OEM |
| HYSTER | H47201-233 | OEM |
| TCM | TCM-47201 | OEM |
| AFTERMARKET | AM-47201 | Cost-effective replacement |
Follow these four steps to get the fastest and most accurate quotation. The more details you provide, the quicker we can confirm compatibility and pricing.
Send Your Part Number or Forklift Information
Provide the OEM part number, a clear photo of the old part, or the forklift brand and model. Any one of these works. We'll use it to cross-match the correct part.
Tell Us Your Quality Preference and Quantity
Choose Original, OEM, or Aftermarket quality. Let us know how many pieces you need — a single trial unit or a bulk order. We'll quote accordingly.
Provide Your Destination and Shipping Preference
Tell us the destination country and preferred shipping method (sea freight, air freight, or express courier). This helps us calculate delivery time and cost accurately.
Combine Related Parts (Optional)
If you need other forklift parts, include them in the same inquiry. We support mixed order consolidation — less freight cost, less paperwork.
Request Forklift Parts Quotation
📦 Part Number
If you already have the OEM number or reference number, quotation and matching will usually be much faster.
🚜 Forklift Model or Serial
If the exact part number is not available, forklift model details can help narrow the correct product range.
📸 Product Photos
Clear old-part photos, labels or packaging images are useful when buyers need help confirming the correct part.
🌍 Quantity & Destination
Quantity, country and shipping terms help improve quotation structure for EXW, FOB or CIF comparison.
Reviews
There are no reviews yet.