Forklift Wheel Hub Cap 25DE-41-3 – Hangcha 20-30H Dust Cover

Forklift Wheel Hub Cap / Dust Cover 25DE-41-3 (ZXQ-25DE-41-3-JL) — Hangcha Forklift 20-30H Hub Dust Cover

This forklift wheel hub cap part number 25DE-41-3 (ZXQ-25DE-41-3-JL) is a Kingstream OEM wheel hub dust cover for Hangcha forklift 20-30H series in manufacturing, warehousing, and material handling. The hub cap is a pressed metal or plastic cover that fits over the center of the wheel hub, protecting the axle nut, drive shaft screws, and wheel bearings from water, dust, dirt, and rust. It also gives the wheel a clean, finished appearance. Weight: 0.10kg net (0.15kg gross) with 13×13×5cm packaging. Simple push-in installation — no special tools required. Kingstream OEM for Hangcha 20-30H forklift fleet wheel hub maintenance.

HUB CAP FUNCTION AND REPLACEMENT: The wheel hub cap is the first line of defense protecting the wheel hub internals from environmental contamination. Water, road salt, dust, and debris entering through a missing or damaged hub cap cause accelerated rust on the axle nut and drive shaft screws, potentially leading to seized fasteners that are extremely difficult to remove during tire changes or brake service. The hub cap also retains the small amount of grease packed around the axle nut. Replacement steps: Step 1 — Use a flat pry tool or large flathead screwdriver to carefully pry the old hub cap off the wheel hub. Step 2 — Clean the hub mating surface to remove any rust, dirt, or old sealant. Step 3 — Align the new hub cap with the hub. Step 4 — Tap the hub cap into place using a rubber mallet or by pressing firmly around the edges until it seats flush with the hub surface. Step 5 — Verify the cap is securely seated and will not come loose during operation. The push-in design makes this a quick DIY replacement. For Hangcha 20-30H forklift fleet maintenance, contact us. Kingstream OEM.

Technical Specifications

Push-in installation. Kingstream OEM. Contact us.