Toyota 3T RH Drum Brake Assembly – 7FB 8FB Electric Forklift

Toyota 3-Ton RH Drum Brake Assembly — Right-Hand Side

This is a right-hand (passenger side) 3-ton drum brake assembly designed as a direct OEM replacement for Toyota 7FB and 8FB series electric forklifts. The assembly arrives fully built on the backing plate with all wear components pre-installed and factory pre-adjusted: brake shoes (primary and secondary), wheel cylinder, return springs, hold-down springs with retainers and pins, self-adjuster cable and lever mechanism, and parking brake linkage assembly. Every component is manufactured to match Toyota OEM specifications for material grades, dimensional tolerances, and performance characteristics, ensuring seamless integration with the existing left-side brake and the forklift master cylinder system for balanced, predictable braking performance under all load conditions.

The brake shoes use Toyota-spec asbestos-free friction material formulated for electric forklift duty cycles — delivering consistent friction coefficient from cold start without warm-up fade issues. The lining compound is bonded under heat and pressure to the steel shoe, then mechanically secured with high-strength brass rivets for redundant attachment integrity. The wheel cylinder features a precision-honed cast iron body with EPDM piston cups and stainless steel pistons, providing leak-free operation with DOT 3 brake fluid for extended service intervals. The backing plate is pressed from 4mm steel with a black e-coat finish that resists the corrosive effects of water, road salt, and cleaning chemical exposure common in food-grade, cold storage, and outdoor forklift applications.

Specifically for the right-hand (RH / passenger side) front brake position on Toyota 7FB10 through 7FB30, 8FB, and 8FBE electric counterbalance forklifts in the 1.0-3.0 ton class. This assembly is NOT interchangeable with the left-hand side — the self-adjuster mechanism and parking brake cable attachment are position-specific. When replacing a single side, always verify the new assembly matches the old one in brake shoe orientation, wheel cylinder bleed screw position, and parking brake lever location before unbolting. For complete axle service, consider replacing both left and right assemblies simultaneously for even braking performance. For the matching left-hand (LH) assembly, brake drums, and DOT 3 fluid, visit our Forklift Brake Parts section. For Toyota torque specifications, refer to Toyota Material Handling.

Technical Specifications

• SKU: TOYOTA-BRAKE-ASSY-RH
• Position: Right-Hand (Passenger Side)
• Capacity: 1.0 – 3.0 Ton Electric Forklift
• Brake Type: Drum Brake (Pre-Assembled)
• Backing Plate: 4mm Steel, Black E-Coat
• Wheel Cylinder: Cast Iron, Stainless Pistons
• Fluid: DOT 3 Compatible

Compatible Toyota Forklift Models

Each assembly is position-verified, pressure-tested, and factory pre-adjusted before packaging. The box is clearly marked “RH” (Right-Hand) to prevent installation errors. Packaged in anti-corrosion VCI film with foam padding in a reinforced cardboard carton. 12-month warranty. Installation tip: before removing the old RH assembly, photograph the brake line routing, spring orientation, and parking brake cable attachment for reference during installation of the new unit. For left-hand (LH) assemblies, complete axle overhaul kits, or fleet maintenance programs, contact our support team.